中文
English
pro case

Product Display

Contact Us

Add:No. 36, Longhua Avenue, Airport Industrial Cluster, Luoyang City, Henan

Tel:0379-64856916

Fax:0379-64837001

E-mail:lxh@lyrtxj.com

Pulley laggingYour location:Home >> Pulley lagging >> pulley lagging service on site

pulley lagging service on site

 

 

1. grinding roller

adhesive residue on the roller clean out, and then use a dedicated grinding machine grinding out on the drum surface roughness no rust points, and finally polished using fiber dish lightly again.

5caaa9f02c9c2.png


2. cleaning the surface

polished surface with a cleaning brush cleaned, and then TIPTOP cleaning agents for cleaning, ensure that the roller surface without any residue. If the drum surface water should wait until dry.

5caaaa1133e2a.png


3. coated adhesive

first metal thin uniform brushing treatment agent in the polished surface of the drum, let it dry completely. Then in a specific ratio with the curing agent stir in the cylinder on the hard and evenly brushing on again, wait until completely dry, then brushing the second time, while also brushing the back of the plastic sheet.


5caaab8a69b6f.png


4.paste plastic sheet

dry curing agent to be slightly sticky but not when attached to the dorsal paste plastic sheet, and rolling with compaction rollers, plastic sheet with a rubber hammer to beat the strong, to ensure that no air bubbles inside, then fill the last use of glue guns seam, and trim the edges to be polished.

5caaabb24ffed.png


5a78189278060.jpg

5a7818ac4112d.jpg

  
  下一条:Diamond Pulley Lagging
Engineering Case
51.La 网站流量统计系统 Copyright © 2018 洛阳瑞塔橡胶有限公司版权所有 备案号:豫ICP备11017250号-1 技术支持:灵一睿网络